LASER CLEANING MACHINE

ROD 500 Bright+: 500 W with short pulses

Looking specifically for ROD 500 Bright+? Enquire about this variant for your process and check the differences from ROD 500 against current documentation.

Average power
500 W
Operating mode
pulsed
Cooling
water-cooled

For businesses · This model is carried into the enquiry.

ROD 500 Bright+LASER CLEANING
AI visualization based on a manufacturer image; details may differ.Manufacturer image from the ROD range

MANUFACTURER DATA

ROD 500 Bright+ technical data

Average power
500 W
Operating mode
pulsed
Cooling
water-cooled
Machine weight
240 kg
Fibre length
10 m
Power supply
230 V, 50 Hz
Dimensions
140 × 64 × 112 cm
Laser class
4

Data as published by the manufacturer, as of 23 September 2026. The quotation confirms the current configuration.

START WITH THE APPLICATION

What do you need to clean?

Choose your task. Suitability of a specific configuration depends on the material, layer and required result.

ROD 500 Bright+: the manufacturer’s data

ROD 500 Bright+ is a pulsed laser cleaner with 500 W average power at a wavelength of 1064 nm and water cooling. According to the manufacturer it weighs 240 kg, measures 140 × 64 × 112 cm and runs on 230 V at 50 Hz. The fibre is 10 m long, and the manufacturer lists up to 100 m for special applications. The machine is laser class 4. For robot integration the manufacturer names interfaces to KUKA, ABB, UR and Stäubli.

The difference from ROD 500 is the pulse duration

Housing, weight, power supply and output are the same for both variants. What differs is the pulse duration range: the manufacturer lists 60 to 500 ns for ROD 500 and 20 to 100 ns for ROD 500 Bright+.

A shorter pulse delivers the same energy to the surface in less time, so the material has less time to conduct heat inwards. Long pulses, on the other hand, remove thick layers such as mill scale, heavy rust or several coats of paint more forcefully. How pulse duration, repetition rate and heat input relate is explained on the pulsed laser cleaner page.

Tasks where the Bright+ variant is worth considering

Short pulses are of interest when thin deposits have to come off and the base material should stay as unchanged as possible: oxides and heat tint on welds, release agents and residues on moulds, or surface preparation before bonding and coating. If thick rust is the main job, ROD 500 with its longer pulses is the right comparison.

Only trials with both settings show whether the difference is visible on your part. Ask in the quotation which pulse range is planned for your layer.

What to include in your enquiry

State the material, the type and thickness of the layer, the area per shift or week and the surface required after cleaning. Add whether the work is done by hand or by robot. If you are torn between ROD 500 and ROD 500 Bright+, ask about both. The quotation then names the exact configuration, the scope of supply and the safety requirements at the workplace.

You will find further machines in the model overview.

YOUR NEXT STEP TOWARDS EQUIPMENT

Ask about ROD 500 Bright+

Describe the component and cleaning task. The enquiry will retain this model name.

Enquire about this model