ROD 300 Air: an air-cooled 300 W laser cleaner for mobile work
ROD 300 Air is a pulsed laser cleaner with 300 W average power. According to the manufacturer it weighs 39 kg, measures 54 × 66 × 69 cm and is specified for 230/110 V at 50/60 Hz. The fibre to the processing head is 10 m long, and the laser is Class 4. The machine stands beside the operator while the head is held in the hand. The page on mobile laser cleaning with a handheld machine describes what that means day to day. Compared with ROD 100 Air, the weight stays the same, the power triples and the fibre is twice as long. Anyone planning to buy a 300 W laser cleaner should first work out how much area each job covers.
What 300 W is used for
A buyer’s guide lists 100 to 300 W as the usual class for handheld machines. For the ROD cleaning systems the manufacturer names rust and paint as applications. The pages on rust removal and paint removal explain how a pulsed laser handles these tasks.
No measurement of ROD 300 Air exists. A table from a manufacturer of pulsed fibre lasers, based on its own projects, gives the order of magnitude. For grade C rust a 300 W laser covers 1.2 to 4.4 m² per hour, against 0.2 to 1.4 m² at 100 W. For stripping 100 µm of paint the same table gives 0.5 to 0.7 m² at 300 W and 0.07 to 0.2 m² at 100 W. At double the coating thickness, these figures leave at most about half the area per hour. For 5 m² of rust that works out at roughly 1.1 to 4.3 hours of pure laser time, without set-up or breaks. The values describe a different system and say nothing about your component.
Firmly bonded mill scale remains a job for blasting, even at 300 W. The US standard AMPP SP21511-1 lets the laser remove only loose mill scale.
ROD 300 Air, ROD 100 Air or ROD 500 Air?
ROD 100 Air suits individual spots where 5 m of fibre is enough. ROD 300 Air makes sense once areas of several square metres become routine or you need 10 m of fibre instead of 5 m. If that is still not enough, the next step is ROD 500 Air with 500 W and 40 kg. The same power is available water-cooled, at 240 kg, as ROD 500. Let your area decide, not the wattage.
Set-up and power supply
Air-cooled means that airflow through the cooling system carries heat out of the machine, so intake and exhaust must stay clear. That does nothing for smoke and particles at the workpiece, which need their own extraction. The 230/110 V at 50/60 Hz is a catalogue value from the manufacturer. Current draw, fusing and plug are listed in the connection data sheet for the configuration quoted. The 10 m fibre is not a working radius: routing and bend radius limit how far the head can work from the machine.
Laser safety at 300 W
A Class 4 laser needs a marked-off laser area, protective eyewear and a laser safety officer appointed in writing, unless the operator already has the expertise (section 5 of the German OStrV). How far the beam stays hazardous is shown by a worked example from the German accident insurers (DGUV) for a handheld machine with 300 W at 1064 nm. The direct beam is safe for the eye only beyond 49 m, and a reflection carrying 15 % of the power only beyond 19 m. The example does not describe a particular machine, but it shows why shielding matters. Mobile screens to DIN EN 12254 are intended only up to 100 W average power, so at 300 W you should look at guards to DIN EN 60825-4. The duties are set out in the guide to laser safety in laser cleaning.
What the quotation should contain
Ask for the data sheet of the configuration being quoted, the EC declaration of conformity and the operating instructions in German. Processing head, fibre, accessories and extraction belong in the quotation as separate items, as does the question of who gives the training and who provides service in Germany. Describe your task with material, coating, area per job and the next process step. The buying guide takes you through these points in order, and the equipment overview shows all models side by side.
Questions about ROD 300 Air
Is a standard socket enough for ROD 300 Air?
According to the manufacturer it is specified for 230/110 V and does not need a three-phase supply. ROD 1000 and ROD 2000 require three-phase 400 V. Fusing and plug are given in the connection data sheet.
How much area does ROD 300 Air clean per hour?
No measurement of the model is available, so we do not give a figure of our own. The manufacturer data above shows only the order of magnitude. A dependable figure comes from your own component, with your coating and your material.
Where is ROD 300 Air made?
According to the manufacturer, in the EU, in the Czech Republic. Laserkompass is not the manufacturer.

