When automated laser cleaning is worthwhile
Automated laser cleaning is a topic to assess when the same operation occurs regularly. Instead of an operator, a robot, a gantry or the line itself then guides the laser head. Parts must be located consistently and the relevant surfaces must be reachable.
The automotive industry is one example. According to Fraunhofer ILT, laser cleaning at car makers and their suppliers mostly runs inline, as local pretreatment before welding, brazing or bonding. One laser manufacturer gives a ring gear as an example: before welding, a short-pulse laser removes the phosphate layer at the joint in less than 10 seconds.
Large tasks are automated too. At a US Air Force base, paint stripping of aircraft was tested with six mobile robots in a project lasting two years.
Handheld or automated: the comparison
| Handheldoperator guides the head | Automatedrobot, gantry or line | |
|---|---|---|
| Changing parts, one-offs | fits well: made for this | poor fit: every variant has to be set up |
| Identical parts in series | with limits: possible, the result depends on the hand | fits well: constant guidance and speed |
| Laser safety | with limits: laser area, eyewear for everyone inside | fits well: a closed cell can be laser class 1 |
| Changing locations | fits well: the machine comes to the part | poor fit: the part comes to the system |
| Planning before the start | fits well: workplace and instruction | with limits: feeding, controls, enclosure, acceptance |
fits wellwith limitspoor fit
The two routes do not exclude each other. If you are unsure, start by hand and automate once the part and the procedure are settled. The details of handheld work are on the handheld page.
What a closed cell changes for laser safety
A handheld cleaning laser is a class 4 laser. Anyone inside the laser area wears eyewear, and the area is cordoned off. A fully enclosed system is different. If no laser radiation escapes in normal operation, manufacturers frequently assign such equipment to laser class 1, according to the German technical rules.
Two restrictions apply. Class 1 holds only for the unopened system as a whole. During maintenance and service the radiation of the built-in source can become accessible, and in Germany a laser safety officer has to be appointed for that. And not every enclosure gives class 1: if the roof or the automatic monitoring of a walk-in access is missing, the hazards have to be assessed specially.
Enclosure, extraction and access for maintenance therefore belong to the installation concept from the start. Assessing only the laser is insufficient.
What should be settled before the enquiry
Describe geometry, batch sizes, cleaning areas and the way components are presented. Specify loading, positioning, line controls and acceptance criteria. Explain how surfaces will be checked and how deviations should be handled. For bonding or coating, see surface preparation.
Robot guidance or inline integration is a possible requirement, not a confirmed equipment feature. Suitability must be clarified around the actual process.
Ask for the price of an automated solution
Describe the component, cycle time and the existing line. This determines which configuration is quoted.
Automotive production provides a recurring-process context. Include your automation requirements in the equipment request; a particular robot cell or interface is not assumed to be available.
