What a laser cleaning machine costs: market prices by power
The prices other suppliers publish show what laser cleaners cost in Germany. The range is wide: for the same power, low-cost imports and machines from established manufacturers often differ by a factor of two to four.
| Power class | New machines on the German market, excl. VAT |
|---|---|
| 100 W, pulsed | approx. €12,500 to €30,200 |
| 300 W, pulsed | approx. €16,700 to €66,300 |
| 500 W, pulsed | approx. €26,200 to €83,100 |
| 1000 W, pulsed | approx. €96,800 to €116,500 |
| 2000 W, pulsed | approx. €194,200 |
| 3000 W, continuous wave (CW) | approx. €7,200 to €26,500 |
Market values from other suppliers' published prices in Germany, as of 4 November 2026. Not a Laserkompass offer: the quotation states the price of the machine offered to you.
What determines the price of a laser cleaner
Whether the quote says laser cleaning machine, laser cleaner, laser rust remover or cleaning laser, the same type of machine is meant and the price follows the same factors. The power class and the operating mode of the laser, pulsed or continuous wave, weigh most. Cooling, the processing head with its optics and the fibre length come next. Extraction, protective equipment, training and delivery are separate items, depending on the quote. A higher power rating alone does not establish suitability or a lower operating cost.
A quote therefore consists of several items. Select one to see what is behind it.
Structure of a quote
Eight items that make up the price
LaserLaser source. Power class and operating mode. More average power costs more. According to one manufacturer, a continuous-wave laser costs less than a pulsed one.
CoolingAir or water. Air-cooled machines are smaller and lighter. In our range air cooling goes up to 500 W; above that the machines are water-cooled.
HeadProcessing head. Scanner and optics determine line width and working distance. Which optics are offered is stated in the quote.
FibreFibre length. In our range 5 or 10 m, according to the manufacturer. It decides how far from the machine the head can work.
ExtractionExtraction with filter. A cleaning laser must not be operated without effective extraction. It is part of the supply scope or bought separately.
ProtectionProtective equipment. Laser eyewear for everyone in the area, screening and a warning light. In Germany the course for the laser safety officer is added.
TrainingCommissioning and documents. Delivery, commissioning, training on the machine, plus operating instructions and declaration of conformity in the national language.
ServiceService and parts. Who provides service and how spare and wear parts are supplied belongs in the quote.
Expensive to buy, cheap to run
The technical sources are candid about the purchase. One reference site calls laser cleaning equipment relatively expensive, and one manufacturer writes that the technology typically needs a higher initial investment than the alternatives. Maintenance and repairs can also be costly.
In operation, little is added. A laser needs electricity and filters for the extraction. It needs no consumables such as abrasive, chemicals or water, and it leaves no spent abrasive to dispose of. According to one manufacturer’s figures, the power consumption ranges from 1.5 kW at 100 W to about 7 kW at 1000 W laser power, depending on the class.
The largest running item is working time. Record preparation, set-up, processing and rework. Establish how often the task occurs and which staff are assigned to it. Compare that total effort with your current process, using the same task and the same quality target. Reliable economic comparisons require application-specific evidence; this page provides no invented purchase prices or savings.
Why quotes differ so widely
Two machines with the same wattage are not the same machine. With pulsed lasers, the peak power in the pulse can differ by a factor of ten. The calculator on the pulsed laser cleaners page shows this with two published 200 W examples. Accessories come on top: a quote with extraction, eyewear and training cannot be compared with the price of the bare machine.
With very cheap imported machines, for example from China, check the documents first. The German insurer BG ETEM wrote in 2024 that not all hand-held laser machines on the market meet the standards and the law. In January 2025 German customs stopped the import of three laser welding machines ordered online because documents were missing and the marking was incomplete. A machine you are not allowed to operate is not cheap.
Buy, lease or rent
A business that cleans every day is usually better off buying. If you need the machine only on some days of the year, compare renting with buying. The guide on renting or buying has a calculator with example values that you replace with your own figures.
Leasing and financing run through a leasing company or your bank. Both need a specific purchase quotation with machine, scope of supply and price. Laserkompass itself promises neither leasing nor lease purchase.
Comparing quotes: the complete scope
A useful equipment quote defines the configuration, accessories and supply scope. Have the planned equipment listed item by item and note what your business already provides. Two quotes can only be compared if they contain the same items. For handheld machines, consider changing locations; for automation, consider integration and component handling.
For every quote
Eleven points for comparing quotes
Tick what a quote answers. Open points are the questions for the next conversation.
0 of 11 points settled
What a quote needs from you
Material, layer, geometry and workload should be stated before configurations are compared. Also say whether cleaning will take place at changing locations or at a fixed workplace.
Laserkompass does not publish flat machine prices. The enquiry form is there to clarify your requirements and discuss a suitable supply scope. A commitment on price, delivery or equipment only arises from the specific sales quotation.
Price factors for specific machine types are covered on the laser rust remover and handheld pages. The buying guide helps prepare the same specification for comparable quotes.
Ask for a price for your task
Material, layer, area and budget range are enough to prepare a quote with a price. You do not need to know a model yet.
