LASER CLEANING MACHINE

ROD 500 Air: air-cooled 500 W laser cleaner

Need 500 W in changing work locations? Tell us about the component, the layer and the area. The quotation also clarifies when the water-cooled ROD 500 is the better choice.

Average power
500 W
Operating mode
pulsed
Cooling
air-cooled

For businesses · This model is carried into the enquiry.

ROD 500 AirLASER CLEANING
AI visualization based on a manufacturer image; details may differ. The images show ROD 300 Air from the same range. A photo of ROD 500 Air is not yet available.The images show ROD 300 Air from the same range. A photo of ROD 500 Air is not yet available.

MANUFACTURER DATA

ROD 500 Air technical data

Average power
500 W
Operating mode
pulsed
Cooling
air-cooled
Machine weight
40 kg
Fibre length
10 m
Power supply
230 V, 50 Hz
Dimensions
61 × 52 × 57 cm
Laser class
4

Data as published by the manufacturer, as of 23 September 2026. The quotation confirms the current configuration.

START WITH THE APPLICATION

What do you need to clean?

Choose your task. Suitability of a specific configuration depends on the material, layer and required result.

A 500 W laser cleaner with air cooling: where ROD 500 Air sits in the range

ROD 500 Air is the most powerful air-cooled model in the range. According to the manufacturer the machine weighs 40 kg, measures 61 × 52 × 57 cm and is specified for 230 V. The fibre is 10 m long. The manufacturer lists it as a mobile cleaning laser.

Below it sits ROD 300 Air with 300 W and 39 kg. ROD 500 has the same 500 W average power but is water-cooled and weighs 240 kg.

ROD 500 Air or ROD 500: what the data shows and what it leaves open

Both machines are pulsed, deliver 500 W and are specified for 230 V. They differ in cooling and weight: 40 kg with air cooling, 240 kg with water cooling. The published data does not say what that means for long shifts, high ambient temperatures or continuous operation. Ask for this difference to be explained in the quotation before you choose a build.

Weight matters when the work location changes: 40 kg instead of 240 kg. The page on mobile laser cleaning with a handheld machine describes what working outside a fixed enclosure requires.

When 500 W with air cooling is worth considering

According to the manufacturer, higher power covers a larger area in less time. Compared with ROD 300 Air, ROD 500 Air is worth considering when the areas get larger but the machine still has to move from place to place. That applies to plant maintenance, to moulds that stay in the press and to components that cannot be brought to a workstation.

Wattage alone does not tell you how fast rust, paint or oil comes off your component. That depends on the layer, the base material and the surface condition you need, and is clarified for your task before the quotation.

What to include in your enquiry

  • the component, its material and the layer to be removed
  • the area per job or per shift, and how often cleaning is needed
  • the work location: a fixed workstation, changing places on site or at a customer
  • the available power supply and the space for extraction and shielding

ROD 500 Air is a Class 4 laser. The guide to laser cleaning safety explains the protective measures. The equipment overview shows ROD 500 Air alongside the other models.

YOUR NEXT STEP TOWARDS EQUIPMENT

Ask about ROD 500 Air

Describe the component and cleaning task. The enquiry will retain this model name.

Enquire about this model