Where car makers clean with the laser
According to Fraunhofer ILT, laser cleaning at car makers and their suppliers mostly runs inline, as local pretreatment before welding, brazing or bonding. The laser removes oil, oxides or a coating from exactly the spot that is about to be joined, and the rest of the component stays as it is.
One laser manufacturer gives examples from the powertrain: ring gears, tripods and battery cells are cleaned before welding. On the ring gear a short-pulse laser removes the phosphate layer at the joint in less than 10 seconds.
| Task | What the laser does | More |
|---|---|---|
| Preparation before welding and brazing | removes oil, oxides and phosphate layers from the joint | surface preparation |
| Bonding areas | removes the top coat, the primer stays as the bonding base | paint removal |
| E-coat (cathodic dip coating) | removes the layer in a limited area | paint removal |
| Seams after welding | removes oxides and residues at the seam | weld cleaning |
| Moulds and tools | detaches release agents and residues, the contour stays | mould cleaning |
Top coat off, primer stays
In selective stripping, coating is removed layer by layer. One manufacturer describes the automotive use like this: the top coat is taken off so that, for example, a windscreen can be bonded directly onto the primer. Cathodic dip coating can also be removed locally. A German coating contractor reports that the layer vaporises and that fine patterns come out free of burrs.
With painted components the complete layer structure should be known. The paint removal page shows which coatings are documented and where the limits lie.
What series production requires
For recurring components, loading, positioning and documented process checks are central. Cycle time, interfaces and how deviations are handled belong in the technical brief.
For laser safety, a closed system has an advantage. A fully enclosed system from which no radiation escapes in normal operation is frequently assigned to laser class 1 by manufacturers, according to the German technical rules. Our page on automated laser cleaning collects these requirements without promising an available robot cell or line approval.
Sensitive components and e-mobility
Identify the material, existing layers and the requirements of the next process. For e-mobility components too, the industry label does not replace technical validation. Electronic and sensitive assemblies require separate assessment of thermal and functional effects.
Ask for a price for your production application
Describe the component, layer and quantity. The price is stated in the quote for a suitable configuration.
Compare equipment options using a representative component and agreed assessment criteria. No series approval or special industry certification is claimed here.

